 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
||||||||||||||||||||||||
 |
 |
 |
 |
 |
 |
 |
|
||||||||||||||||||
 |
 |
 |
 |
 |
|
||||||||||||||||||||
 |
 |
 |
|
||||||||||||||||||||||
 |
 |
 |
|
||||||||||||||||||||||
 |
|
||||||||||||||||||||||||
 |
|
||||||||||||||||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|||||||||||||||
 |
 |
 |
 |
|
|||||||||||||||||||||
|
PPM 80 Specification
Seating: Up to 41 (depending on customer specification) 1 wheelchair position Maximum capacity 80 (including standing passengers) Primary Drive Line: Two powered bogies each featuring - Ford 2 litre LPG engine - 1 x 12V battery for LPG unit - Transmission through Newage marine gearbox, Tandler bevel box and 4 'V' belt drive to flywheel - 2 x 12V battery supply for ancillary power - 2 LPG bottles with electric change-over Alternatives - fuel tank - track side intermittent electrical supply point - green diesel or hydrogen fuel Flywheel & Energy Store: 2x 500kg 1m dia Normal effective speed range 1000-2600rpm Transmission: Linde hydrostatics through final drive gearbox, single axle drive Braking: Normal braking through transmission (i.e. regenerative) 1m/s2 Emergency braking through sprung on, air off discs at 3m/s2 with normal adhesion Tread and/or track brakes available if required Air operated sanding gear Running Gear: Solid axle with wheels 610mm dia to tram or railway profiles to suit application Primary suspension of chevron type (coil spring optional) Heating: 4 x Water heated air blown Separate cab heating and ventilation Maximum Speed: 80km/h (50mph) Curves: 20m radius minimum |
|||
|
